Strength of 5GHz is still lower than of 2.4GHz. Re: hap ax2 US, routerOS 7.8, UNII-4 not working Sun 11:14 am It's (from certification point of view) a lot easier/safer to leave it completely out instead of first checking which role the device is playing and then act accordingly. Wds-mode=disabled wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=no default-forwarding=yes default-ap-tx-limit=0 Wds-default-bridge=none wds-ignore-ssid=no bridge-mode=enabled default-authentication=yes default-forwarding=yes default-ap-tx-limit=0ĭefault-client-tx-limit=0 hide-ssid=yes security-profile=default compression=noġ R name="wlan2" mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:03 arp=enabled interface-type=Atheros AR9888 mode=ap-bridge ssid="xxxxx-5" frequency=5660īand=5ghz-a/n/ac channel-width=20/40/80mhz-XXXX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 Here are current settings: 0 R name="wlan1" mtu=1500 l2mtu=1600 mac-address=B8:xx:xx:xx:xx:04 arp=enabled interface-type=Atheros AR9300 mode=ap-bridge ssid="xxxx-2" frequency=autoīand=2ghz-b/g/n channel-width=20/40mhz-XX secondary-frequency="" scan-list=default wireless-protocol=802.11 vlan-mode=no-tag vlan-id=1 wds-mode=disabled I've tried to reset configuration for 5GHz wlan, change its region, but without success. HAP AC2 upgrading to ROS v7, should I do it Hi, Got 3 HAP AC2s and ROS 6.49.6 on all, and all is working well. I repeat, there were no obstacles between the notebook and the router, only thin air. The hAP ac is a Dual-concurrent Access Point that provides Wifi coverage for 2.4 GHz and 5 GHz. My impression is that generally this is not normal. MikroTik RBD52G-5HacD2HnD-TC hAP ac2 Dual-Concurrent Router. Numbers are -42dbm for 2.4GHz and -68dbm for 5GHz. Here is the plot of wifi signal strength, that I've collected using my notebook located in direct visibility of the router at the distance of about 5-6m.Ĭyan line shows 2.4GHz signal and red line shows 5GHz signal. My notebook sometimes disconnects from 5GHz wlan, and one of smartphones in my family doesn't connect to 5GHz at all. Recently I've updated RouterOS to version 7.1.3 and have found that 5GHz access point has issues.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |